Inquire
| Item | Package | Approx Pieces | QTY | |
|---|---|---|---|---|
| 8x2" | Master Box | 3,000 | Add To Quote | |
| 9x2 1/2" | Master Box | 2,500 | Add To Quote | |
| 9x2 3/4" | Master Box | 2,000 | Add To Quote | |
| 9x3" | Master Box | 2,000 | Add To Quote | |
| 10x3 1/2" | Master Box | 1,000 | Add To Quote |
Specifications:
Gauge – #8 and #10
Lengths – 1-1/8” to 4”
Head Type – Flat
Thread Type – Single Lead
Recess Type – #2 Square recess
Finish – Clear or Yellow Zinc, Gray Phosphate, and GRABBERGARD® GRABBER® screws are manufactured in an ISO 9002 and ISO 14001 certified and approved factory, and are approved by ICC ER report ER-5280.
Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 2500 RPM.
The Flat head is fully seated when the head is flush with the work surface.
Overdriving may result in failure of the fastener or stripout of the work surface.
The fastener must penetrate beyond the metal a minimum of three thread pitches.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1002, as referenced in ICCES report ER-5280 are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.
